Marmitek SC9000 Guida Utente Pagina 30
- Pagina / 44
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
EXTRA OPTIONS
30 MARMITEK
6. Press the zone number (27-32) followed by the ON or OFF key to set the zone. If entry correctly, the selected zone will become
flashing.
7. Repeat last step for additional zones.
8. Select the same zone again will clear it.
9. Press CLEAR to go back to the main menu. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2
for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu.
9.6.2 Using the Marmitek X-10 ON/OFF trigger function
ARM the system. If the zone selected by procedure above has triggered the system. The House code of the system (default A)+1,
unit code 7-12 + ON or OFF (selected by user in procedure above) will be transmitted via the mains.
Example, if user selected 32+OFF in setup, X-10 B12 OFF will be transmitted via the mains with 32 wire opened.
9.7 Deregistering a Door/Window Sensor
1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear
on the display.
3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4. Press OK.
5. Enter the number of the zone you want to erase on the number pad and press CLEAR.
6. You are asked to confirm CLEAR ZONE 1. YES 2. NO.
7. Press 1 to erase the zone. The zone number is shown on the display.
8. Press CLEAR again to quit the menu.
☺ Zones 31 and 32 cannot be erased.
9.8 Deregistering a Motion Detector
1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear
on the display.
3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4. Press OK.
5. Enter the number of the zone you want to erase on the number pad and press CLEAR.
6. You are asked to confirm CLEAR ZONE 1. YES 2. NO.
7. Press 1 to erase the zone. The zone number is shown on the display.
8. Press CLEAR again to quit the menu.
☺ Zones 31 and 32 cannot be erased.
20071_20090424_UG_SC9000_EN 30-07-2009 09:10 Pagina 30
- SAFEGUARD 1
- TOTALGUARD 1
- 2 MARMITEK 2
- 3SAFEGUARD / TOTALGUARD 3
- Introduction 4
- Safety warnings 4
- Marmitek SafeGuard-system 5
- Marmitek TotalGuard-systeem 6
- 2. The security 7
- 2.1 Installing the console 8
- 2.3 The menus 9
- BASIC OPTIONS 10
- 7. OPTIONS 10
- 3. Installing remote controls 12
- 4. Installing the sensors 14
- 4.2 Motion Detector MS90 15
- 5.1 Setting the clock 17
- 5.2 Storing phone numbers 18
- 6. Using the security system 19
- 6.2 Panic alarm 20
- 6.4 Disarming the system 21
- 6.5 Error messages 21
- 7.1 Introduction 22
- 7.2 Addressing your modules 23
- 7.8 Setting the timer 24
- EXTRA OPTIONS 26
- 9.2 Activating the chime 27
- 9.3 Using wired inputs 28
- 10.4 Transceiver function 31
- 11. Telephone functions 34
- 12.Changing the batteries 35
- 13.Frequently asked questions 36
- 37SAFEGUARD / TOTALGUARD 37
- TABEL SENSORS 38
- TABEL TELEPHONE NUMBERS 38
- TECHNICAL DATA 39
- DECLARATION OF CONFORMITY 40
Prodotti e manuali riguardandi Sistemi di controllo di accesso Marmitek SC9000
(28 pagine)
(29 pagine)HP Servidor HP ProLiant DL360 G4p manuales
Manuales del propietario y guías del usuario para Hardware De La Computadora HP Servidor HP ProLiant DL360 G4p.
Ofrecemos 2 manuales en pdf HP Servidor HP ProLiant DL360 G4p para descargar gratis por tipos de documentos: Manual de usuario
Commenti su questo manuale