Marmitek SAFEGUARD Guida Utente Pagina 13
- Pagina / 40
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
3.2
Comfort Remote Control SH624 (standard with TotalGuard, optional with SafeGuard, art. no. 09170)
1. PANIC
With this red button the panic alarm can be activated immediately.
2. CONTROL INDICATOR
Lights up when the remote control transmits radio signals when pressing the
buttons.
If the indicator light is not very bright, the batteries should be replaced.
3. CONTROL BUTTONS
For operating the security system and for the comfort functions (see 7.6).
4. DIMMER BUTTON (see 7.6)
5. MODUS SWITCH
Switch to the SEC setting to use the security functions. For settings 1 and 2, see
7.6.
SWITCH IN SEC SETTING:
ARM HOME: The security system is partly armed. All door/widow sensors
are activated, while the motion detectors are switched off.
ARM AWAY: The security system is fully armed. All sensors are activated.
DISARM: Switches off the security system.
6. HOUSECODE SWITCH
Leave the switch set to A for now (see 10.6 for more information).
3.2.1 Using the Comfort Remote Control
1. INSERTING THE BATTERIES
IMPORTANT: When inserting the batteries, the switch should not be in setting 2!
Open the battery compartment on the back of the remote control and insert the
batteries (4x AAA, alkaline). Do not forget to check the polarity (+/-). Close the compartment.
2. ACTIVATING THE SH624
Press the ‘PANIC’ button.
3.2.2 Registering the Comfort Remote Control
1. To access the menu, press the menu or menu button. The display will now read ‘ENTER PIN’.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). For every digit entered, a * will appear
on the display.
3. When the PIN code has been entered correctly, the word ‘INSTALL’ will show up on the display.
4. Press OK. The display now reads ‘INSTALL ZONE’.
5. Set the switch to SEC. Press the ARM HOME button on your Comfort Remote Control. The console will beep to confirm. The
display will read ‘RMOT 2 SET’.
a. If you have more than 2 remote controls installed, it will read e.g. RMOT 3 SET, RMOT 4 SET, … RMOT 16 SET. You can
register up to 16 remote controls.
6. Repeat step 5 for every remote control you wish to register.
7. Press CLEAR to go back to the main menu. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2
for No. If you choose Yes, you will quit the menu. If you choose No, you go back to the main menu.
☺ Read chapter 12 for information on replacing the batteries.
BASIC OPTIONS
13SAFEGUARD / TOTALGUARD
1
6
2
3
4
5
- SAFEGUARD 1
- TOTALGUARD 1
- 2 MARMITEK 2
- 3SAFEGUARD / TOTALGUARD 3
- Introduction 4
- Safety warnings 4
- Marmitek SafeGuard-system 5
- Marmitek TotalGuard-systeem 6
- 2. The security 7
- 2.1 Installing the console 8
- 2.3 The menus 9
- BASIC OPTIONS 10
- 7. OPTIONS 10
- 3. Installing remote controls 12
- 4. Installing the sensors 14
- 4.2 Motion Detector MS90 15
- 5.1 Setting the clock 17
- 5.2 Storing phone numbers 18
- 6. Using the security system 19
- 6.2 Panic alarm 20
- 6.4 Disarming the system 21
- 6.5 Error messages 21
- 7.1 Introduction 22
- 7.2 Addressing your modules 23
- 7.8 Setting the timer 24
- EXTRA OPTIONS 26
- 9.2 Activating the chime 27
- 9.3 Using wired inputs 28
- 10.4 Transceiver function 31
- 11. Telephone functions 33
- 12. Changing the batteries 34
- TABEL SENSORS 37
- TABEL TELEPHONE NUMBERS 37
- TECHNICAL DATA 38
- DECLARATION OF CONFORMITY 39
Prodotti e manuali riguardandi Sistemi di controllo di accesso Marmitek SAFEGUARD
(24 pagine)
HP Servidor HP ProLiant DL360 G4p manuales
Manuales del propietario y guías del usuario para Hardware De La Computadora HP Servidor HP ProLiant DL360 G4p.
Ofrecemos 2 manuales en pdf HP Servidor HP ProLiant DL360 G4p para descargar gratis por tipos de documentos: Manual de usuario
Commenti su questo manuale